TEL. & FAX +66(0)2-020-3301
 |
 |
 |
With the NPort® 5600 Rackmount Series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network.
Only basic configuration is needed with the NPort® 5600 to connect up to 16 serial devices to an Ethernet network.
NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5600 device servers suitable for a standard 19-inch rackmount, allowing you to simplify operational, maintenance, and administrative tasks.
Real COM/TTY drivers are provided to make the serial ports on the NPort® 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.
The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but they also help field engineers monitor the status of attached serial devices.
When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5650-8/16 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.
Ethernet Interface | |
| 10/100BaseT(X) Ports (RJ45 connector) | 1 |
| Magnetic Isolation Protection | 1.5 kV (built-in) |
| Optical Fiber | Read more |
Ethernet Software Features | |
| Configuration Options | Telnet Console, Web Console (HTTP/HTTPS), Windows Utility |
| Management | ARP, BOOTP, DHCP Client, DNS, HTTP, HTTPS, ICMP, IPv4, LLDP, RFC2217, Rtelnet, PPP, SLIP, SMTP, SNMPv1/v2c, TCP/IP, Telnet, UDP |
| Filter | IGMP v1/v2c |
| Windows Real COM Drivers | Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded |
| Linux Real TTY Drivers | Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x |
| Fixed TTY Drivers | SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X |
| Android API | Android 3.1.x and later |
| Time Management | SNTP |
Serial Interface | |
| Connector | 8-pin RJ45 |
| No. of Ports | 8 or 16 ports |
| Serial Standards | NPort 5610 Series: RS-232 NPort 5630 Series: RS-422, RS-485 NPort 5650 Series: RS-232, RS-422, RS-485 |
| Operation Modes | Disabled, Ethernet Modem, Pair Connection, Real COM, Reverse Telnet, RFC2217, TCP Client, TCP Server, UDP |
| Baudrate | Supports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | None, RTS/CTS (RS-232 only), DTR/DSR (RS-232 only), XON/XOFF |
| Pull High/Low Resistor for RS-485 | 1 kilo-ohm, 150 kilo-ohms |
| Terminator for RS-485 | 120 ohms |
| RS-485 Data Direction Control | ADDC® (automatic data direction control) |
Serial Signals | |
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-2w | Data+, Data-, GND |
Power Parameters | |
| Input Current | NPort 5610-8-48V/16-48V: 135 mA @ 48 VDC NPort 5650-8-HV-T/16-HV-T: 152 mA @ 88 VDC NPort 5610-8/16: 141 mA @ 100 VAC NPort 5630-8/16: 152 mA @ 100 VAC NPort 5650-8/8-T/16/16-T: 158 mA @ 100 VAC NPort 5650-8-M-SC/16-M-SC: 174 mA @ 100 VAC NPort 5650-8-S-SC/16-S-SC: 164 mA @ 100 VAC |
| Input Voltage | HV Models: 88 to 300 VDC AC Models: 100 to 240 VAC, 47 to 63 Hz DC Models: ±48 VDC, 20 to 72 VDC, -20 to -72 VDC |
Reliability | |
| Automatic Reboot Trigger | Built-in WDT |
Physical Characteristics | |
| Housing | Metal |
| Installation | 19-inch rack mounting |
| Dimensions (with ears) | 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in) |
| Dimensions (without ears) | 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in) |
| Weight | NPort 5610-8: 2,290 g (5.05 lb) NPort 5610-8-48V: 3,160 g (6.97 lb) NPort 5610-16: 2,490 g (5.49 lb) NPort 5610-16-48V: 3,260 g (7.19 lb) NPort 5630-8: 2,510 g (5.53 lb) NPort 5630-16: 2,560 g (5.64 lb) NPort 5650-8/5650-8-T: 2,310 g (5.09 lb) NPort 5650-8-M-SC: 2,380 g (5.25 lb) NPort 5650-8-S-SC/5650-16-M-SC: 2,440 g (5.38 lb) NPort 5650-8-HV-T: 3,720 g (8.20 lb) NPort 5650-16/5650-16-T: 2,510 g (5.53 lb) NPort 5650-16-S-SC: 2,500 g (5.51 lb) NPort 5650-16-HV-T: 3,820 g (8.42 lb) |
| Interactive Interface | LCD panel display (standard temp. models only) Push buttons for configuration (standard temp. models only) |
Environmental Limits | |
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) High-Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
| Storage Temperature (package included) | Standard Models: -20 to 70°C (-4 to 158°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) High-Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMC | EN 55032/24 |
| EMS | NPort 5650-8/16 Series: IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2.5 kV; Signal: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 IEC 61000-4-11 DIPs NPort 5650-8/16-HV Series: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 |
| Medical | EN 60601-1-2 Class B, EN 55011 |
| Safety | UL 60950-1 |
MTBF | |
| Time | NPort 5610-8: 877,888 hrs NPort 5610-8-48V: 870,961 hrs NPort 5610-16: 666,105 hrs NPort 5610-16-48V: 662,111 hrs NPort 5630-8: 765,449 hrs NPort 5630-16: 473,748 hrs NPort 5650-8: 692,010 hrs NPort 5650-8-T: 692,010 hrs NPort 5650-8-HV-T: 627,078 hrs NPort 5650-8-M-SC: 678,053 hrs NPort 5650-8-S-SC: 678,053 hrs NPort 5650-16: 473,748 hrs NPort 5650-16-T: 473,748 hrs NPort 5650-16-HV-T: 442,626 hrs NPort 5650-16-M-SC: 467,180 hrs NPort 5650-16-S-SC: 467,180 hrs |
| Standards | AC models: MIL-HDBK-217F HV models: Telcordia (Bellcore) Standard TR/SR |
Warranty | |
| Warranty Period | 5 years |
| Details | See www.moxa.com/warranty |
| Name | Type | Version | Release Date | |
| Datasheet for NPort 5600 Series | Datasheet | V1.4 | 30 January 2020 |
| Ethernet Interface Connector | 8-pin RJ45 |
| Serial Interface | RS-232 |
| No. of Serial Ports | 8 |
| Operating Temp. | 0 to 60°C |
| Input Voltage | 100-240 VAC |
| Ethernet Interface Connector | 8-pin RJ45 |
| Serial Interface | RS-232 |
| No. of Serial Ports | 8 |
| Operating Temp. | 0 to 60°C |
| Input Voltage | ±48 VDC |
| Ethernet Interface Connector | 8-pin RJ45 |
| Serial Interface | RS-422/485 |
| No. of Serial Ports | 8 |
| Operating Temp. | 0 to 60°C |
| Input Voltage | 100-240 VAC |
| Ethernet Interface Connector | 8-pin RJ45 |
| Serial Interface | RS-232 |
| No. of Serial Ports | 16 |
| Operating Temp. | 0 to 60°C |
| Input Voltage | 100-240 VAC |
| Ethernet Interface Connector | 8-pin RJ45 |
| Serial Interface | RS-232 |
| No. of Serial Ports | 16 |
| Operating Temp. | 0 to 60°C |
| Input Voltage | ±48 VDC |
| Ethernet Interface Connector | 8-pin RJ45 |
| Serial Interface | RS-422/485 |
| No. of Serial Ports | 16 |
| Operating Temp. | 0 to 60°C |
| Input Voltage | 100-240 VAC |
| Ethernet Interface Connector | 8-pin RJ45 |
| Serial Interface | RS-232/422/485 |
| No. of Serial Ports | 8 |
| Operating Temp. | 0 to 60°C |
| Input Voltage | 100-240 VAC |
| Ethernet Interface Connector | Multi-mode fiber SC |
| Serial Interface | RS-232/422/485 |
| No. of Serial Ports | 8 |
| Operating Temp. | 0 to 60°C |
| Input Voltage | 100-240 VAC |
| Ethernet Interface Connector | Single-mode fiber SC |
| Serial Interface | RS-232/422/485 |
| No. of Serial Ports | 8 |
| Operating Temp. | 0 to 60°C |
| Input Voltage | 100-240 VAC |
| Ethernet Interface Connector | 8-pin RJ45 |
| Serial Interface | RS-232/422/485 |
| No. of Serial Ports | 8 |
| Operating Temp. | -40 to 75°C |
| Input Voltage | 100-240 VAC |
| Ethernet Interface Connector | 8-pin RJ45 |
| Serial Interface | RS-232/422/485 |
| No. of Serial Ports | 8 |
| Operating Temp. | -40 to 85°C |
| Input Voltage | 88-300 VDC |
| Ethernet Interface Connector | 8-pin RJ45 |
| Serial Interface | RS-232/422/485 |
| No. of Serial Ports | 16 |
| Operating Temp. | 0 to 60°C |
| Input Voltage | 100-240 VAC |
| Ethernet Interface Connector | Multi-mode fiber SC |
| Serial Interface | RS-232/422/485 |
| No. of Serial Ports | 16 |
| Operating Temp. | 0 to 60°C |
| Input Voltage | 100-240 VAC |
| Ethernet Interface Connector | Single-mode fiber SC |
| Serial Interface | RS-232/422/485 |
| No. of Serial Ports | 16 |
| Operating Temp. | 0 to 60°C |
| Input Voltage | 100-240 VAC |
| Ethernet Interface Connector | 8-pin RJ45 |
| Serial Interface | RS-232/422/485 |
| No. of Serial Ports | 16 |
| Operating Temp. | -40 to 75°C |
| Input Voltage | 100-240 VAC |
| Ethernet Interface Connector | 8-pin RJ45 |
| Serial Interface | RS-232/422/485 |
| No. of Serial Ports | 16 |
| Operating Temp. | -40 to 85°C |
| Input Voltage | 88-300 VDC |
Notice: Undefined variable: detail_ap in /opt/lampp/htdocs/productview.php on line 639
