TEL. & FAX +66(0)2-020-3301
 |
 |
 |
ADDERLink DV104T is a high performance digital video extender and splitter that enables you to locate your critical play out hardware in a secure and temperature controlled environment away from the display point environment whilst maintaining the same user experience.
Hardware compatibility |
| All computers with HDMI connections - requirement dependent |
HDMI interface |
| The system supports resolutions such as 480p, 720p, 1080P or WUXGA (1920x1200) @60Hz and 24 bit color depth. Does not support HDCP |
Software compatibility |
| All known operating systems. |
Audio |
| The system delivers eight channels of HDMI audio with sample sizes of 16, 20 or 24 bit at 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz. |
Connections |
| 2 x HDMI type A male, 4 x CATx sockets for link outputs,1 x 10/100Base-TX network port (config), 1 x 9-way D-sub RS232C port, 2.5mm DC power jack |
Operating temperature |
| 0 to 40ºC / 32 to 104ºF |
Physical design |
| 3pin Toby jack (power adapter included),100-240VAC 50/60Hz, 0.8A, input to power adapter. 12VDC 18W output from power adapter |
Approvals |
| CE, FCC |
| Resolution | Frequency | Patch Connections | Cable Type | Distance |
| 1920x1200 | 60Hz | 0 | CAT7a | 50 meters |
| 1920x1200 | 60Hz | 0 | CAT6a (shielded) | 50 meters |
| 1920x1200 | 60Hz | 2 | CAT6a (shielded) | 40 meters |
| 1920x1200 | 60Hz | 2 | CAT7a | 40 meters |
Note: Distances are achieved using single lengths of trunk/bulk cable. For each break/patch connection reduce distance by 5 meters.
Preferably patch cables should be of type CAT7a and less than 2 meters. Patch cables over 2 meters must be CAT7a.
| Name | Type | Version | Release Date | |
| ADDERLink DV104T Datasheet | Datasheet | V6.0 | 04 August 2020 |
Notice: Undefined variable: detail_ap in /opt/lampp/htdocs/productview.php on line 639
