TEL. & FAX +66(0)2-020-3301
 |
 |
 |
The EDR-810 is a highly integrated industrial multiport secure router with firewall/NAT/VPN and managed Layer 2 switch functions. It is designed for Ethernet-based security applications on critical remote control or monitoring networks, and it provides an electronic security perimeter for the protection of critical cyber assets including pump-and-treat systems in water stations, DCS systems in oil and gas applications, and PLC/SCADA systems in factory automation. The EDR-810 Series includes the following cybersecurity features:
Firewall/NAT: Firewall policies control network traffic between different trust zones, and Network Address Translation (NAT) shields the internal LAN from unauthorized activity by outside hosts.
VPN: Virtual Private Networking (VPN) is designed to provide users with secure communication tunnels when accessing a private network from the public Internet. VPNs use IPsec (IP Security) server or client mode for encryption and authentication of all IP packets at the network layer to ensure confidentiality and sender authentication.
The EDR-810’s “WAN Routing Quick Setting” provides an easy way for users to set up WAN and LAN ports to create a routing function in four steps. In addition, the EDR-810’s “Quick Automation Profile” gives engineers a simple way to configure the firewall filtering function with general automation protocols, including EtherNet/IP, Modbus TCP, EtherCAT, FOUNDATION Fieldbus, and PROFINET. Users can easily create a secure Ethernet network from a user-friendly web UI with a single click, and the EDR-810 is capable of performing deep Modbus TCP packet inspection. Wide-temperature range models that operate reliably in hazardous, -40 to 75°C environments are also available.
Input/Output Interface | |
| Alarm Contact Channels | Resistive load: 1 A @ 24 VDC |
| Buttons | Reset button |
| Digital Input Channels | +13 to +30 V for state 1 -30 to +3 V for state 0 Max. input current: 8 mA |
Ethernet Interface | |
| 10/100BaseT(X) Ports (RJ45 connector) | 8 |
| 100/1000BaseSFP Slots | 2 |
| Standards | IEEE 802.1Q for VLAN Tagging IEEE 802.3 for 10BaseT IEEE 802.3ab for 1000BaseT(X) Static Port Trunk IEEE 802.3u for 100BaseT(X) IEEE 802.3x for flow control IEEE 802.3z for 1000BaseSX/LX/LHX/ZX |
Ethernet Software Features | |
| Broadcast Forwarding | IP directed broadcast, broadcast forwarding |
| Management | Back Pressure Flow Control, DDNS, DHCP Server/Client, Web Console (HTTP/HTTPS), LLDP, QoS/CoS/ToS, SNMPv1/v2c/v3, Telnet, TFTP |
| Multicast Routing | DVMRP, PIM-SM, PIM-SSM |
| Redundancy Protocols | RSTP, STP, Turbo Ring v2 |
| Routing | Throughput: 10,000 packets per second (max. 100 Mbps) |
| Routing Redundancy | VRRP |
| Security | All models: HTTPS/SSL, SSH, L2TP (server), RADIUS EDR-810-VPN-2GSFP Series: HTTPS/SSL, SSH, IPsec, OpenVPN (client and server), UDP and TCP Tunnel mode (routing) and TAP mode (bridge), L2TP (server), RADIUS, L2TP (server), RADIUS |
| Time Management | NTP Server/Client, SNTP |
| Unicast Routing | OSPF, RIPV1/V2, Static Route |
| Filter | IGMP v1/v2/v3 |
Switch Properties | |
| VLAN ID Range | VID 1 to 4094 |
| IGMP Groups | 256 |
| Max. No. of VLANs | 16 |
LED Interface | |
| LED Indicators | STATE, PWR1, PWR2, FAULT, 10/100/1000M |
DoS and DDoS Protection | |
| Technology | ARP-Flood, FIN Scan, ICMP-Death, NEWWithout-SYN Scan, NMAP-ID Scan, NMAP-Xmas Scan, Null Scan, SYN/FIN Scan, SYN/RST Scan, SYN- Flood, Xmas Scan |
Firewall | |
| Deep Packet Inspection | Modbus TCP Modbus UDP |
| Filter | DDoS, Ethernet protocols, ICMP, IP address, MAC address, Ports |
| Quick Automation Profiles | DNP, EtherCAT, EtherNet/IP, FOUNDATION Fieldbus, FTP, HTTP, IEC 60870-104, IPsec, L2TP, LonWorks, Modbus TCP, PPTP, PROFINET, RADIUS, SSH, Telnet |
| Stateful Inspection | Router firewall Transparent (bridge) firewall |
| Throughput | Max. 10,000 packets per second (max. 100 Mbps) |
IPsec VPN | |
| Authentication | EDR-810-VPN-2GSFP Series: MD5 and SHA (SHA-256), RSA (key size: 1024-bit, 2048-bit), X.509 v3 certificate |
| Concurrent VPN Tunnels | EDR-810-VPN-2GSFP Series: Max. 10 IPsec VPN tunnels |
| Encryption | EDR-810-VPN-2GSFP Series: DES, 3DES, AES-128, AES-192, AES-256 |
| Protocols | EDR-810-VPN-2GSFP Series: IPsec, L2TP (server), PPTP (client) |
| Throughput | EDR-810-VPN-2GSFP Series: Max. 17 Mbps (Conditions: AES-256, SHA-256) |
NAT | |
| Features | 1-to-1, N-to-1, Port forwarding |
OpenVPN | |
| Authentication | EDR-810-VPN-2GSFP Series: User password by MD5 and SHA1 |
| Concurrent VPN Tunnels | EDR-810-VPN-2GSFP Series: Client Mode: max. 2 external servers Server Mode: max. 5 external clients |
| Encryption | EDR-810-VPN-2GSFP Series: AES-128/192/256 CBC, Blowfish CBC, DES CBC, DES-EDE3 CBC |
| Protocols | EDR-810-VPN-2GSFP Series: OpenVPN (client and server), UDP, and TCP Tunnel mode (routing) and TAP mode (bridge) |
| Throughput | EDR-810-VPN-2GSFP Series: Max. 5 Mbps |
Real-Time Firewall / VPN Event Log | |
| Event Type | All models: Firewall event EDR-810-VPN-2GSFP Series: VPN event |
| Media | Local storage, SNMP Trap, Syslog server |
Serial Interface | |
| Console Port | RS-232 (TxD, RxD, GND), 3-pin (115200, n, 8, 1) |
Power Parameters | |
| Connection | Removable terminal block |
| Input Voltage | 12 to 48 VDC |
| Input Current | 0.706 A @ 12 VDC, 0.353 A @ 24 VDC, 0.187 A @ 48 VDC |
| Reverse Polarity Protection | Supported |
Physical Characteristics | |
| Housing | Metal |
| Dimensions | 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in) |
| Weight | 830 g (2.10 lb) |
| Installation | DIN-rail mounting, Wall mounting (with optional kit) |
Environmental Limits | |
| Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
| Safety | UL 508 |
| EMC | EN 55032/24 |
| Hazardous Locations | UL/cUL Class I Division 2 Groups A/B/C/D |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF |
| Railway | EN 50121-4 |
| Traffic Control | NEMA TS2 |
| Shock | IEC 60068-2-27 |
| Freefall | IEC 60068-2-32 |
| Vibration | IEC 60068-2-6 |
MTBF | |
| Time | 981,954 hrs |
| Standard | Telcordia (Bellcore), GB |
Warranty | |
| Warranty Period | 5 years |
| Details | See www.moxa.com/warranty |
| Name | Type | Version | Release Date | |
| Datasheet for EDR-810 Series | Datasheet | V1.4 | 26 March 2020 |
| 10/100BaseT(X) Ports RJ45 Connector | 8 |
| 100/1000Base SFP Slots | 2 |
| Firewall | ✓ |
| NAT | ✓ |
| VPN | – |
| Operating Temp. | -10 to 60°C |
| 10/100BaseT(X) Ports RJ45 Connector | 8 |
| 100/1000Base SFP Slots | 2 |
| Firewall | ✓ |
| NAT | ✓ |
| VPN | – |
| Operating Temp. | -40 to 75°C |
| 10/100BaseT(X) Ports RJ45 Connector | 8 |
| 100/1000Base SFP Slots | 2 |
| Firewall | ✓ |
| NAT | ✓ |
| VPN | ✓ |
| Operating Temp. | -10 to 60°C |
| 10/100BaseT(X) Ports RJ45 Connector | 8 |
| 100/1000Base SFP Slots | 2 |
| Firewall | ✓ |
| NAT | ✓ |
| VPN | ✓ |
| Operating Temp. | -40 to 75°C |
Notice: Undefined variable: detail_ap in /opt/lampp/htdocs/productview.php on line 639
