TEL. & FAX +66(0)2-020-3301

EDR-G9010 Series

Home  >   MOXA  >   Industrial Network Infrastructure  >  
Secure Routers

8 GbE copper + 2 GbE SFP multiport industrial secure router

Product Feature

  • All-in-one firewall/NAT/VPN/router/switch with 10 GbE ports
  • Secure remote access tunnel with VPN
  • Stateful firewall protects critical assets
  • Inspect industrial protocols with PacketGuard technology
  • Easy network setup with Network Address Translation (NAT)
  • RSTP/Turbo Ring redundant protocol enhances network redundancy
  • Security features based on IEC 62443/NERC CIP
  • Supports secure boot for checking system integrity
  • Check firewall settings with the intelligent SettingCheck feature
  • -40 to 75°C operating temperature range (-T model)

Introduction

The EDR-G9010 Series is a set of highly integrated industrial multi-port secure routers with firewall/NAT/VPN and managed Layer 2 switch functions. These devices are designed for Ethernet-based security applications in critical remote control or monitoring networks. These secure routers provide an electronic security perimeter to protect critical cyber assets including substations in power applications, pump-and-treat systems in water stations, distributed control systems in oil and gas applications, and PLC/SCADA systems in factory automation.

 

Defend Against Malicious Threats With Advanced Cybersecurity Features

The EDR-G9010 Series’ embedded firewall uses policy rules to control network traffic between trusted zones while Network Address Translation (NAT) shields the internal network from unauthorized access by outside hosts. The Virtual Private Networking (VPN) functionality further provides users with secure communication tunnels when accessing the private network from the public Internet. To help protect your OT assets from cyberattacks, the EDR-G9010 Series supports Deep Packet Inspection (DPI) to examine the data portion of network packets for various OT-specific protocols.

 

Simplify Configurations With the User-friendly Interface and Quick Settings

The EDR-G9010 Series’ “Interface Type Quick Settings” provide an easy way for users to set up WAN, LAN, and Bridge ports for routing functionality in just four steps. In addition, the “Quick Automation Profile” feature gives engineers a simple way to configure the firewall filtering function for general automation protocols, including EtherNet/IP, Modbus TCP, EtherCAT, FOUNDATION Fieldbus, and PROFINET.

 

Industrial-grade Design to Ensure Uninterrupted Network Connectivity

The EDR-G9010 Series’ rugged hardware makes these secure routers ideal for harsh industrial environments, featuring wide-temperature models that are built to operate reliably in hazardous conditions and extreme temperatures of -40 up to 75°C. Moreover, the EDR-G9010 Series supports comprehensive Layer 2 and Layer 3 redundancy mechanisms to ensure that your network stays connected at all times.

Input/Output Interface

Alarm Contact ChannelsResistive load: 1 A @ 24 VDC
ButtonsReset button
Digital Input Channels+13 to +30 V for state 1
-30 to +3 V for state 0
Max. input current: 8 mA

Ethernet Interface

10/100/1000BaseT(X) Ports (RJ45
connector)
8
1000BaseSFP Slots2
StandardsIEEE 802.1Q for VLAN Tagging
IEEE 802.3 for 10BaseT
IEEE 802.3ab for 1000BaseT(X)
Static Port Trunk
IEEE 802.3u for 100BaseT(X)
IEEE 802.3x for flow control
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX

Ethernet Software Features

Broadcast ForwardingIP directed broadcast, broadcast forwarding
ManagementBack Pressure Flow Control, DDNS, DHCP Server/Client, Web Console
(HTTP/HTTPS), LLDP, QoS/CoS/ToS, SNMPv1/v2c/v3, Telnet, TFTP,
HTTPS, SSH
Redundancy ProtocolsRSTP, STP, Turbo Ring v2
RoutingThroughput: 350K packets per second (max. 1500 Mbps)
Routing TableMax. 4K routing rules
Concurrent ConnectionsMax. 400K
Connections Per SecondMax. 20K
Routing RedundancyVRRP
SecuritySecure Boot, IPsec, L2TP (server), RADIUS, Trust access control
Time ManagementNTP Server/Client, SNTP
Unicast RoutingOSPF, RIPV1/V2, Static Route
Multicast RoutingStatic Route
FilterIGMP v1/v2/v3

Switch Properties

VLAN ID RangeVID 1 to 4094
IGMP Groups256
Max. No. of VLANs16

LED Interface

LED IndicatorsPWR1, PWR2, STATE, MSTR/H.TC, CPLR/T.TC, VRRP/HA, VPN, USB

DoS and DDoS Protection

TechnologyARP-Flood, FIN Scan, ICMP-Death, NEWWithout-SYN Scan, NMAP-ID
Scan, NMAP-Xmas Scan, Null Scan, SYN/FIN Scan, SYN/RST Scan, 
SYN-Flood, Xmas Scan

Firewall

FilterDDoS, Ethernet protocols, ICMP, IP address, MAC address, Ports
Quick Automation ProfilesDNP, EtherCAT, EtherNet/IP, FOUNDATION Fieldbus, FTP, HTTP, IEC
60870-104, IPsec, L2TP, LonWorks, Modbus TCP, PPTP, PROFINET,
RADIUS, SSH, Telnet
Stateful InspectionRouter firewall
Transparent (bridge) firewall
Deep Packet InspectionAdditional protocols will be supported through future firmware updates.
ThroughputMax. 350K packets per second (max. 1500 Mbps)

IPsec VPN

AuthenticationMD5 and SHA (SHA-256)
RSA (key size: 1024-bit, 2048-bit)
X.509 v3 certificate
Concurrent VPN TunnelsMax. 250 IPsec VPN tunnels
EncryptionDES, 3DES, AES-128, AES-192, AES-256
ProtocolsIPsec, L2TP (server), PPTP (client)
ThroughputMax. 300 Mbps (Conditions: AES-256, SHA-256)

NAT

Features1-to-1, N-to-1, Port forwarding

Real-Time Firewall / VPN Event Log

Event TypeFirewall event, VPN event
MediaLocal storage, SNMP Trap, Syslog server

Serial Interface

Console PortRS-232 (TxD, RxD, GND), 3-pin (115200, n, 8, 1)
ConnectorUSB Type-C

Power Parameters

ConnectionRemovable terminal block
Input Voltage12/24/48 VDC
Input Current1.51 A @ 12 VDC
0.70 A @ 24 VDC
0.35 A @ 48 VDC
Reverse Polarity ProtectionSupported

Physical Characteristics

HousingMetal
Dimensions58 x 135 x 105 mm (2.28 x 5.31 x 4.13 in)
Weight1030 g (2.27 lb)
InstallationDIN-rail mounting, Wall mounting (with optional kit)

Environmental Limits

Operating TemperatureStandard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package
included)
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)

Standards and Certifications

SafetyUL 62368-1
EMCEN 55032/35
EMICISPR 32, FCC Part 15B Class A
EMSIEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
RailwayEN 50121-4
Traffic ControlNEMA TS2
MaritimeIEC 60945
Power SubstationIEEE 1613, IEC 61850-3 Edition 2.0
ShockIEC 60068-2-27
FreefallIEC 60068-2-32
VibrationIEC 60068-2-6
 MTBF
Time1,080,807 hrs
StandardsTelcordia (Bellcore), GB

Warranty

Warranty Period5 years
DetailsSee www.moxa.com/warranty
Name Type Version Release Date
Datasheet for EDR-G9010 Series Datasheet V1.0 22 June 2021

EDR-G9010-VPN-2MGSFP

10/100/1000BaseT(X) Ports (RJ45 Connector) 8
1000BaseSFP Slots 2
Firewall
NAT
VPN
Operating Temp. -10 to 60°C

EDR-G9010-VPN-2MGSFP-T

10/100/1000BaseT(X) Ports (RJ45 Connector) 8
1000BaseSFP Slots 2
Firewall
NAT
VPN
Operating Temp. -40 to 75°C

Notice: Undefined variable: rs5 in /opt/lampp/htdocs/productview.php on line 633

Notice: Trying to get property 'tab_ap' of non-object in /opt/lampp/htdocs/productview.php on line 633


Notice: Undefined variable: title_ap in /opt/lampp/htdocs/productview.php on line 638


Notice: Undefined variable: detail_ap in /opt/lampp/htdocs/productview.php on line 639

บริษัท พีที ออโตเมชั่น (ไทยแลนด์) จำกัด

  • เลขที่ 9 อาคารภคินท์ ชั้น 9 ห้องเลขที่ 901 ถนนรัชดาภิเษก แขวงดินแดง เขตดินแดง กรุงเทพฯ 10400
  • โทรและแฟกซ์ : +66(0)-2020-3000
  • อีเมล์ : [email protected]
  • Facebook : facebook.com/ptautomations

จันทร์ ถึง ศุกร์ เวลา 9.00 น. – 18.00 น.

EN
TH