TEL. & FAX +66(0)2-020-3301
 |
 |
 |
 |
INTRODUCTION
Robustel’s R2000 Dual Industrial Dual Module Cellular VPN Router with Power over Ethernet provides fast and reliable communication for monitoring and controlling remote equipment. The added new feature, Power over Ethernet, makes installing or expanding much simpler and cheaper for both power and data transmission.
The R2000 Dual router adds the Power over Ethernet (POE) function, which can provide DC power to such devices while transmitting data signals to some IP-based terminal devices. Not only save network construction costs, reduce manpower and material resources, but also facilitate installation and management.
Robustel is a leading global industrial IoT/M2M hardware and solution provider. Since its establishment in 2010 in Guangzhou, China, Robustel has been focusing on designing and manufacturing industrial cellular routers, gateways, modems, cloud platforms and E2E solutions. In order to support global business in more than 100+ countries and regions, Robustel has set up local offices in Germany, Australia, the Netherlands, the UK, Japan and Hong Kong. The main application areas of the R2000 Dual router are: ATMs, vending machines, telephone booths and other terminals; branches, convenience stores, fast food restaurants, digital signage, IP video surveillance, etc.
Cellular Interface | |
| Standards | GSM/GPRS/EDGE/UMTS/WCDMA/HSPA/HSDPA/HSUPA/HSPA+/DC-HSPA+/LTE |
| FDD LTE | max. 150/50 Mbps (DL/UL) @20M BW cat4 |
| TDD LTE | max. 100/50 Mbps (DL/UL) |
| DC-HSPA+ | 42/5.76 Mbps (DL/UL) |
| HSPA+ | max. 21.6/5.76 Mbps (DL/UL) |
| WCDMA | 384/384 kbps (DL/UL) |
| EDGE | 236.8 kbps (DL/UL) |
| GPRS | 85.6 kbps (DL/UL) |
| SIM | 2 (3 V & 1.8 V) |
| Connector | SMA-K (2 x MAIN + 2 x AUX) |
Ethernet Interface | |
| Number of ports | 1 x WAN and 4 x LAN (10/100 Mbps) |
| Magnet isolation protection | 1.5KV |
WLAN Interface | |
| Standard | 802.11b/g/n, supporting AP and Client mode |
| Data speed | 150 Mbps |
| Frequency band | 2.412 – 2.485 GHz |
| Security | WEP, WPA, WPA2 |
| Encryption | 64/128 AES, TKIP |
| Connector | RP-SMA, female |
Device Interface | |
| POE (4 x LAN) | Four ports power supply output IEEE802.3 at/af standard compatibility Maximum power output up to 30 W per port Power management function Voltage Range: 48 to 57V DC |
| Digital Input (DI) | When router is used in in-vehicle networks, DI function makes router enter a state of low power consumption which can avoid the battery excessive consumption of the vehicle. |
System | |
| 1 x Reset button | |
| LED indicators: 1 x RUN, 2 x PPP, 1 x USR, 2 x NET, 6 x RSSI | |
Software | |
| Network protocols | PPP, TCP, UDP, DHCP, ICMP, NAT, DMZ, DDNS, VRRP, HTTP, HTTPs, DNS, ARP, SNTP, SSH, Telnet, SNMP, AAA etc. |
| VPN tunnel | IPsec/OpenVPN/GRE/L2TP/PPTP/DMVPN |
| Firewall | SPI, anti-DoS, Filter, Access Control |
| Management | Web, SMS, CLI |
Power Supply and Consumption | |
| Connector | 3.5 mm terminal block |
| Input voltage | 9 to 57V DC |
| Power consumption | 100 mA@12 V Data link: 800 mA (peak)@12 V With ground screw |
Physical Characteristics | |
| Housing & Weight | Metal, 750 g |
| Dimension | 145 x 130 x 46 mm |
| Installation | Flat surface placement, wall mounting and 35 mm DIN rail mounting |
| Approvals | |
| Regulatory | RCM, CE, EAC, |
| Environmental | RoHS2.0, WEEE |
| EMI | EN 55032: 2015/AC: 2016 (CE & RE) Class B |
| EMS | IEC 61000-4-2 (ESD) Contact Level 2; Air Level 3 IEC 61000-4-3 (RS) Level 2 IEC 61000-4-4 (EFT) Level 2 IEC 61000-4-5 (Surge) Level 3 IEC 61000-4-6 (Cs) Level 2 |
| Name | Type | Version | Release Date | |
| R2000 Dual Datasheet | Datasheet | V1.1 | 24 July 2020 |
Notice: Undefined variable: detail_ap in /opt/lampp/htdocs/english/productview.php on line 615
